04. Распаковка и настройка Apache Atlas

Please enter the full path to the credential provider: jceks:///opt/atlas/conf/atlas.jceks
Please enter the password value for keystore.password: changeit
Please enter the password value for keystore.password again: changeit
Please enter the password value for truststore.password: changeit
Please enter the password value for truststore.password again: changeit
Please enter the password value for password: changeit
Please enter the password value for password again: changeit

CLUSTERNAME="TEST2"
REALMNAME="TEST2.LAN"
LDAPDOMAINNAME="dc=test2,dc=lan"
LDAPSERVERS="ldaps://dev-ipa110p.test2.lan ldaps://dev-ipa111p.test2.lan ldaps://dev-ipa112p.test2.lan"
ZOOKEEPERSERVERS="dev-zk110p.test2.lan:2181,dev-zk111p.test2.lan:2181,dev-zk112p.test2.lan:2181"
KAFKASERVERS="dev-dn110p.test2.lan:9092,dev-dn111p.test2.lan:9092,dev-dn112p.test2.lan:9092"
ATLASURL="https://$(hostname)"

CLNLOWER=$(echo $CLUSTERNAME | tr [:upper:] [:lower:])

cat << EOF | sudo tee /opt/atlas/conf/atlas-application.properties
 #
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements.  See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership.  The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License.  You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

#########  Graph Database Configs  #########

# Graph Database

#Configures the graph database to use.  Defaults to JanusGraph
#atlas.graphdb.backend=org.apache.atlas.repository.graphdb.janus.AtlasJanusGraphDatabase

# Graph Storage
# Set atlas.graph.storage.backend to the correct value for your desired storage
# backend. Possible values:
#
# hbase
# cassandra
# embeddedcassandra - Should only be set by building Atlas with  -Pdist,embedded-cassandra-solr
# berkeleyje
#
# See the configuration documentation for more information about configuring the various  storage backends.
#
atlas.graph.storage.backend=hbase2
atlas.graph.storage.hbase.table=apache_atlas_janus

#Hbase
#For standalone mode , specify localhost
#for distributed mode, specify zookeeper quorum here
atlas.graph.storage.hostname=${ZOOKEEPERSERVERS}
atlas.graph.storage.hbase.regions-per-server=1
atlas.graph.storage.lock.wait-time=10000

#In order to use Cassandra as a backend, comment out the hbase specific properties above, and uncomment the
#the following properties
#atlas.graph.storage.clustername=
#atlas.graph.storage.port=

# Gremlin Query Optimizer
#
# Enables rewriting gremlin queries to maximize performance. This flag is provided as
# a possible way to work around any defects that are found in the optimizer until they
# are resolved.
#atlas.query.gremlinOptimizerEnabled=true

# Delete handler
#
# This allows the default behavior of doing "soft" deletes to be changed.
#
# Allowed Values:
# org.apache.atlas.repository.store.graph.v1.SoftDeleteHandlerV1 - all deletes are "soft" deletes
# org.apache.atlas.repository.store.graph.v1.HardDeleteHandlerV1 - all deletes are "hard" deletes
#
#atlas.DeleteHandlerV1.impl=org.apache.atlas.repository.store.graph.v1.SoftDeleteHandlerV1

# Entity audit repository
#
# This allows the default behavior of logging entity changes to hbase to be changed.
#
# Allowed Values:
# org.apache.atlas.repository.audit.HBaseBasedAuditRepository - log entity changes to hbase
# org.apache.atlas.repository.audit.CassandraBasedAuditRepository - log entity changes to cassandra
# org.apache.atlas.repository.audit.NoopEntityAuditRepository - disable the audit repository
#
atlas.EntityAuditRepository.impl=org.apache.atlas.repository.audit.HBaseBasedAuditRepository

# if Cassandra is used as a backend for audit from the above property, uncomment and set the following
# properties appropriately. If using the embedded cassandra profile, these properties can remain
# commented out.
# atlas.EntityAuditRepository.keyspace=atlas_audit
# atlas.EntityAuditRepository.replicationFactor=1

# Graph Search Index
atlas.graph.index.search.backend=solr

#Solr
#Solr cloud mode properties
atlas.graph.index.search.solr.mode=cloud
atlas.graph.index.search.solr.zookeeper-url=${ZOOKEEPERSERVERS}/solr
atlas.graph.index.search.solr.zookeeper-connect-timeout=60000
atlas.graph.index.search.solr.zookeeper-session-timeout=60000
atlas.graph.index.search.solr.wait-searcher=true

#Solr http mode properties
#atlas.graph.index.search.solr.mode=http
#atlas.graph.index.search.solr.http-urls=http://localhost:8983/solr

# ElasticSearch support (Tech Preview)
# Comment out above solr configuration, and uncomment the following two lines. Additionally, make sure the
# hostname field is set to a comma delimited set of elasticsearch master nodes, or an ELB that fronts the masters.
#
# Elasticsearch does not provide authentication out of the box, but does provide an option with the X-Pack product
# https://www.elastic.co/products/x-pack/security
#
# Alternatively, the JanusGraph documentation provides some tips on how to secure Elasticsearch without additional
# plugins: https://docs.janusgraph.org/latest/elasticsearch.html
#atlas.graph.index.search.hostname=dev-app111p.test2.lan:9200
atlas.graph.index.search.elasticsearch.client-only=true

# Solr-specific configuration property
atlas.graph.index.search.max-result-set-size=150

#########  Import Configs  #########
#atlas.import.temp.directory=/temp/import

#########  Notification Configs  #########
atlas.notification.embedded=false
atlas.kafka.zookeeper.connect=${ZOOKEEPERSERVERS}
atlas.kafka.bootstrap.servers=${KAFKASERVERS}
atlas.kafka.zookeeper.session.timeout.ms=60000
atlas.kafka.zookeeper.connection.timeout.ms=60000
atlas.kafka.zookeeper.sync.time.ms=20
atlas.kafka.auto.commit.interval.ms=1000
atlas.kafka.hook.group.id=atlas

atlas.kafka.enable.auto.commit=true
atlas.kafka.auto.offset.reset=earliest
atlas.kafka.session.timeout.ms=30000
atlas.kafka.offsets.topic.replication.factor=1
atlas.kafka.poll.timeout.ms=1000

atlas.kafka.security.protocol=SASL_PLAINTEXT
atlas.kafka.sasl.mechanism=GSSAPI
atlas.kafka.sasl.kerberos.service.name=kafka

## Server port configuration
#atlas.server.http.port=21000
#atlas.server.https.port=21443

#########  Security Properties  #########

# SSL config
atlas.enableTLS=true

#truststore.file=/path/to/truststore.jks
#cert.stores.credential.provider.path=jceks://file/path/to/credentialstore.jceks
truststore.file=/usr/java/jdk1.8.0_181-cloudera/jre/lib/security/jssecacerts
cert.stores.credential.provider.path=jceks://file///opt/atlas/conf/atlas.jceks

#following only required for 2-way SSL
#keystore.file=/path/to/keystore.jks
keystore.file=/opt/cloudera/security/pki/server.jks

atlas.authentication.method.pam=false
atlas.authentication.method.pam.service=login

# Authentication config
atlas.authentication.method=kerberos
atlas.authentication.keytab=/opt/atlas/conf/atlas.keytab
atlas.authentication.principal=atlas/_HOST@${REALMNAME}

atlas.authentication.method.kerberos=true

atlas.authentication.method.kerberos.principal=atlas/_HOST@${REALMNAME}
atlas.authentication.method.kerberos.keytab=/opt/atlas/conf/atlas.keytab
atlas.authentication.method.kerberos.name.rules=RULE:[2:\$1@\$0](atlas@${REALMNAME})s/.*/atlas/
atlas.authentication.method.kerberos.token.validity=3600

#### user credentials file
atlas.authentication.method.file=false
#atlas.authentication.method.file.filename=${sys:atlas.home}/conf/users-credentials.properties

#### ldap.type= LDAP or AD
atlas.authentication.method.ldap=true
atlas.authentication.method.ldap.type=ldap

### groups from UGI
atlas.authentication.method.ldap.ugi-groups=true

######## LDAP properties #########
atlas.authentication.method.ldap.url=${LDAPSERVERS}
atlas.authentication.method.ldap.userDNpattern=uid={0},cn=users,cn=accounts,${LDAPDOMAINNAME}
#atlas.authentication.method.ldap.groupSearchBase=cn=groups,cn=accounts,${LDAPDOMAINNAME}
#atlas.authentication.method.ldap.groupSearchFilter=(&(member={0})(cn=${CLNLOWER}_atlas_*))
#atlas.authentication.method.ldap.groupRoleAttribute=cn
#atlas.authentication.method.ldap.base.dn=cn=accounts,${LDAPDOMAINNAME} #atlas.authentication.method.ldap.bind.dn=uid=${BINDUSER},cn=sysaccounts,cn=etc,${LDAPDOMAINNAME} #atlas.authentication.method.ldap.bind.password=$(BINDPASS)
#atlas.authentication.method.ldap.referral=follow
#atlas.authentication.method.ldap.user.searchfilter=(uid={0})
atlas.authentication.method.ldap.default.role=ROLE_USER

#########  JAAS Configuration ########
atlas.jaas.KafkaClient.loginModuleName=com.sun.security.auth.module.Krb5LoginModule
atlas.jaas.KafkaClient.loginModuleControlFlag=required
atlas.jaas.KafkaClient.option.useKeyTab=true
atlas.jaas.KafkaClient.option.storeKey=true
atlas.jaas.KafkaClient.option.serviceName=kafka
atlas.jaas.KafkaClient.option.keyTab=/opt/atlas/conf/atlas.keytab
atlas.jaas.KafkaClient.option.principal=atlas/_HOST@${REALMNAME}

atlas.jaas.Client.loginModuleName=com.sun.security.auth.module.Krb5LoginModule
atlas.jaas.Client.loginModuleControlFlag=required
atlas.jaas.Client.option.useKeyTab=true
atlas.jaas.Client.option.storeKey=true
atlas.jaas.Client.option.keyTab=/opt/atlas/conf/atlas.keytab
atlas.jaas.Client.option.principal=atlas/_HOST@${REALMNAME}

#########  Server Properties  #########
atlas.rest.address=${ATLASURL}:21443
# If enabled and set to true, this will run setup steps when the server starts
#atlas.server.run.setup.on.start=false

#########  Entity Audit Configs  #########
atlas.audit.hbase.tablename=apache_atlas_entity_audit
atlas.audit.zookeeper.session.timeout.ms=1000
atlas.audit.hbase.zookeeper.quorum=${ZOOKEEPERSERVERS}

#########  High Availability Configuration ########
atlas.server.ha.enabled=false
#### Enabled the configs below as per need if HA is enabled #####
#atlas.server.ids=id1
#atlas.server.address.id1=localhost:21000
#atlas.server.ha.zookeeper.connect=localhost:2181
#atlas.server.ha.zookeeper.retry.sleeptime.ms=1000
#atlas.server.ha.zookeeper.num.retries=3
#atlas.server.ha.zookeeper.session.timeout.ms=20000
## if ACLs need to be set on the created nodes, uncomment these lines and set the values ##
#atlas.server.ha.zookeeper.acl=<scheme>:<id>
#atlas.server.ha.zookeeper.auth=<scheme>:<authinfo>

######### Atlas Authorization #########
atlas.authorizer.impl=simple
atlas.authorizer.simple.authz.policy.file=atlas-simple-authz-policy.json

#########  Type Cache Implementation ########
# A type cache class which implements
# org.apache.atlas.typesystem.types.cache.TypeCache.
# The default implementation is org.apache.atlas.typesystem.types.cache.DefaultTypeCache
# which is a local in-memory type cache.
#atlas.TypeCache.impl=

#########  Performance Configs  #########
#atlas.graph.storage.lock.retries=10
#atlas.graph.storage.cache.db-cache-time=120000

#########  CSRF Configs  #########
atlas.rest-csrf.enabled=true
atlas.rest-csrf.browser-useragents-regex=^Mozilla.*,^Opera.*,^Chrome.*
atlas.rest-csrf.methods-to-ignore=GET,OPTIONS,HEAD,TRACE
atlas.rest-csrf.custom-header=X-XSRF-HEADER

############ KNOX Configs ################
#atlas.sso.knox.browser.useragent=Mozilla,Chrome,Opera
#atlas.sso.knox.enabled=true
#atlas.sso.knox.providerurl=https://<knox gateway ip>:8443/gateway/knoxsso/api/v1/websso
#atlas.sso.knox.publicKey=

############ Atlas Metric/Stats configs ################
# Format: atlas.metric.query.<key>.<name>
atlas.metric.query.cache.ttlInSecs=900
#atlas.metric.query.general.typeCount=
#atlas.metric.query.general.typeUnusedCount=
#atlas.metric.query.general.entityCount=
#atlas.metric.query.general.tagCount=
#atlas.metric.query.general.entityDeleted=
#
#atlas.metric.query.entity.typeEntities=
#atlas.metric.query.entity.entityTagged=
#
#atlas.metric.query.tags.entityTags=

#########  Compiled Query Cache Configuration  #########

# The size of the compiled query cache.  Older queries will be evicted from the cache
# when we reach the capacity.

#atlas.CompiledQueryCache.capacity=1000

# Allows notifications when items are evicted from the compiled query
# cache because it has become full.  A warning will be issued when
# the specified number of evictions have occurred.  If the eviction
# warning threshold <= 0, no eviction warnings will be issued.

#atlas.CompiledQueryCache.evictionWarningThrottle=0


#########  Full Text Search Configuration  #########

#Set to false to disable full text search.
#atlas.search.fulltext.enable=true

#########  Gremlin Search Configuration  #########

#Set to false to disable gremlin search.
atlas.search.gremlin.enable=false


########## Add http headers ###########

#atlas.headers.Access-Control-Allow-Origin=*
#atlas.headers.Access-Control-Allow-Methods=GET,OPTIONS,HEAD,PUT,POST
#atlas.headers.<headerName>=<headerValue>


#########  UI Configuration ########

atlas.ui.default.version=v1
EOF

sudo chown atlas.atlas /opt/atlas/conf/atlas-application.properties

cat << EOF | sudo tee /opt/atlas/conf/atlas-env.sh
#!/usr/bin/env bash
#
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements.  See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership.  The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License.  You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# The java implementation to use. If JAVA_HOME is not found we expect java and jar to be in path
#export JAVA_HOME=
export JAVA_HOME="/usr/java/jdk1.8.0_181-cloudera"

# any additional java opts you want to set. This will apply to both client and server operations
#export ATLAS_OPTS=

# any additional java opts that you want to set for client only
#export ATLAS_CLIENT_OPTS=

# java heap size we want to set for the client. Default is 1024MB
#export ATLAS_CLIENT_HEAP=

# any additional opts you want to set for atlas service.
#export ATLAS_SERVER_OPTS=

# indicative values for large number of metadata entities (equal or more than 10,000s)
#export ATLAS_SERVER_OPTS="-server -XX:SoftRefLRUPolicyMSPerMB=0 -XX:+CMSClassUnloadingEnabled -XX:+UseConcMarkSweepGC -XX:+CMSParallelRemarkEnabled -XX:+PrintTenuringDistribution -XX:+HeapDumpOnOutOfMemoryError -XX:HeapDumpPath=dumps/atlas_server.hprof -Xloggc:logs/gc-worker.log -verbose:gc -XX:+UseGCLogFileRotation -XX:NumberOfGCLogFiles=10 -XX:GCLogFileSize=1m -XX:+PrintGCDetails -XX:+PrintHeapAtGC -XX:+PrintGCTimeStamps"
export ATLAS_SERVER_OPTS="-server -XX:SoftRefLRUPolicyMSPerMB=0 -XX:+CMSClassUnloadingEnabled -XX:+UseConcMarkSweepGC \
  -XX:+CMSParallelRemarkEnabled -XX:+PrintTenuringDistribution -XX:+HeapDumpOnOutOfMemoryError \
  -XX:HeapDumpPath=dumps/atlas_server.hprof -Xloggc:logs/gc-worker.log -verbose:gc -XX:+UseGCLogFileRotation \
  -XX:NumberOfGCLogFiles=10 -XX:GCLogFileSize=1m -XX:+PrintGCDetails -XX:+PrintHeapAtGC -XX:+PrintGCTimeStamps \
  -Djava.security.krb5.conf=/etc/krb5.conf \
  -Djava.security.auth.login.config=/opt/atlas/conf/jaas.conf"

# java heap size we want to set for the atlas server. Default is 1024MB
#export ATLAS_SERVER_HEAP=

# indicative values for large number of metadata entities (equal or more than 10,000s) for JDK 8
export ATLAS_SERVER_HEAP="-Xms15360m -Xmx15360m -XX:MaxNewSize=5120m -XX:MetaspaceSize=100M -XX:MaxMetaspaceSize=512m"

# What is is considered as atlas home dir. Default is the base locaion of the installed software
#export ATLAS_HOME_DIR=
export ATLAS_HOME_DIR="/opt/atlas"

# Where log files are stored. Defatult is logs directory under the base install location
#export ATLAS_LOG_DIR=
export ATLAS_LOG_DIR="/opt/atlas/logs"

# Where pid files are stored. Defatult is logs directory under the base install location
export ATLAS_PID_DIR="/opt/atlas"

# where the atlas titan db data is stored. Defatult is logs/data directory under the base install location
#export ATLAS_DATA_DIR=
export ATLAS_DATA_DIR="/opt/atlas/data"

# Where do you want to expand the war file. By Default it is in /server/webapp dir under the base install dir.
#export ATLAS_EXPANDED_WEBAPP_DIR=
export ATLAS_EXPANDED_WEBAPP_DIR="/opt/atlas/server/webapp"

# indicates whether or not a local instance of HBase should be started for Atlas
export MANAGE_LOCAL_HBASE=false

# indicates whether or not a local instance of Solr should be started for Atlas
export MANAGE_LOCAL_SOLR=false

# indicates whether or not cassandra is the embedded backend for Atlas
export MANAGE_EMBEDDED_CASSANDRA=false

# indicates whether or not a local instance of Elasticsearch should be started for Atlas
export MANAGE_LOCAL_ELASTICSEARCH=false

export HBASE_CONF_DIR="/etc/hbase/conf"
EOF

sudo chown atlas.atlas /opt/atlas/conf/atlas-env.sh